Cutting tool edge honing with wet blasting
July 25, 2024
Honing cutting tool edges using wet blasting is a highly accurate and consistent process, enabling the manufacture of high-added-value cutting tools.
Burrs that occur on the cutting edge during the manufacturing of cutting tools (inserts, etc.) are removed by wet blasting, and by giving the cutting edge a radius (cutting edge honing), chipping is prevented. At the same time, this process is also effective in improving the adhesion strength of the coating on the cutting edge. Another feature of our equipment is the easy control of K value (cutting edge shape).
For more details, please see below.
News list
- 2024/10/31
- TECHNOLOGYClean, high-precision oxide scale removal that replaces shot blasting and pickling.
- 2024/08/29
- EVENTMacoho to exhibit at IMTS 2024
- 2024/08/08
- TECHNOLOGYWet blasting is possible to remove droplets without making holes in the coating film.
- 2024/07/24
- EVENTGratitude for attending JPCA 2024 and information on materials that were distributed there
- 2024/05/20
- EVENTMacoho to exhibit at the JPCA Show 2024
- 2024/03/01
- EVENTMacoho to exhibit at IPC APEX EXPO 2024
- 2024/01/17
- EVENTMacoho to exhibit at DesignCon 2024